Day: August 3, 2021

Goowell shows you the workshop USB cable manufacturing process. The step after wire cutting, wire stripping, connector soldering, then put on injection machine for this step. You could find that our workers work in high efficiency. Normally the connectors need to be injected 2 times, the first time is an inner moulding, the 2nd time is outer moulding. In this way, the connector is strong and not easy to break.
Torras mini 20W PD fast charging charger has rounded corners, so it doesn’t hurt to use. The input side is a cut-out design, with a fixed pin, charging more stable. The charger supports PD3.0 fast charging protocol and has two fixed voltage levels of 5V3A and 9V2.22A, which can meet the daily full-speed fast charging needs of iPhone 8 or above. Through the assmbly process, we learned that the charger not only uses the internal U-shaped structure design, but also uses the PI highly integrated master chip SC1548C.
In terms of charging performance, the Samsung S10+ uses a USB-C interface that supports PD, QC, and AFC fast charging protocols, which is widely compatible and very selective when picking charging accessories, which is very convenient. After a full charging test, it was found that the Samsung S10+ was charging with either a PD charger or a QC or AFC charger, and its maximum power was around 15W, and it took nearly two hours to charge the whole thing. The charging power is not high inside the fast-charging phone, which is a large part of the reason or from the Note 7 incident, but the recent rumors that Samsung will follow through the system update to let S10 + support 25W fast charging, I will continue to follow up the review, welcome to continue to pay attention.
Receive the latest news

Subscribe To Ou Newsletter

Get notified about new products